Cailiao gongcheng (Apr 2024)

Corrosion resistance behavior of different MOF superhydrophobic coatings on magnesium alloy surface

  • LIU Jinyu,
  • ZHANG Zhiyuan,
  • WANG Dong,
  • JIANG Shiquan,
  • WEN Yuqing,
  • SHANG Wei

DOI
https://doi.org/10.11868/j.issn.1001-4381.2022.000602
Journal volume & issue
Vol. 52, no. 4
pp. 138 – 145

Abstract

Read online

In order to study the corrosion resistance of three different superhydrophobic coatings (MZS-1, MZS-2 and ZnO@ZIF-8) on AZ91D magnesium alloy surface in 5% (mass fraction) NaCl solution. The microstructure, wettability and corrosion resistance of the superhydrophobic composite coating were tested and characterized by field emission scanning electron microscope, static contact angle tester, electrochemical workstation and salt spray tester, respectively. The results show that the corrosion of the superhydrophobic coatings does not occur until 192 h after salt spray treatment among the three types of superhydrophobic coatings, and the corrosion of the MZS-1 superhydrophobic coating is the most serious. The surface pitting of the MZS-2 superhydrophobic coating doesn't occur until 240 h later, and the contact angle is still high after salt spray treatment, so the corrosion resistance of the MZS-2 composite coating is the best.The polarization curve tests indicate that the corrosion current density of three superhydrophobic coatings are still one order of magnitude lower than that of the metal matrix after salt spray treatment for 240 h, showing excellent corrosion resistance. The superhydrophobic coating can effectively increase the corrosion resistance of metal materials.It can effectively prevent the infiltration of corrosive ions and provide long-term protection for the matrix because of its water repellency.

Keywords