Numerical Prediction on In-Cylinder Mixture Formation and Combustion Characteristics for SIDI Engine Fueled with Hydrogen: Effect of Injection Angle and Equivalence Ratio

Abstract

Although their ease of transport, storage, and use makes hydrocarbon fuels dominant in commercial energy systems, the emission of harmful gases, including greenhouse gases, is a fatal disadvantage. Despite ongoing research to improve thermal efficiency and reduce the emissions of internal combustion engines using conventional hydrocarbon fuels, achieving net-zero carbon requires decarbonizing fuels rather than reducing the use of internal combustion engines. Hence, transitioning away from hydrocarbon fuels and evolving internal combustion engines into clean engines using carbon-free fuels, such as hydrogen, is necessary. This study designs a 2.0 L research engine and numerically analyzes its combustion characteristics and spray behavior by varying the spray angle and equivalence ratio. When comparing the turbulence kinetic energy at a 45-degree spray angle with that at 30 degrees and 60 degrees, on average, there was a difference of approximately 37.54 m2/s2 and 26.21 m2/s2, respectively. However, misfires occur in the lean condition. Although hydrogen has a wide flammability range, poor mixture formation under lean conditions can result in misfires. The 60-degree spray angle resulted in the highest combustion temperatures and pressures for all equivalence ratio conditions, consequently leading to the highest emissions of nitrogen oxides. Specifically, at a lambda value of 2.5, the 60-degree spray angle emitted approximately 29 ppm, 0 ppm, and 161 ppm of nitrogen oxides for each respective spray angle.

Keywords

• combustion characteristics
• direct injection
• equivalence ratio
• hydrogen
• spray angle