Driving toward Connectivity: Vehicular Visible Light Communications Receiver with Adaptive Field of View for Enhanced Noise Resilience and Mobility

Abstract

Wireless communication represents the basis for the next generation of vehicle safety systems, whereas visible light communication (VLC) is one of the most suitable technologies for this purpose. In this context, this work introduces a novel VLC receiver architecture that integrates a field-of-view (FoV) adaptation mechanism in accordance with the optical noise generated by the sun. In order to demonstrate the benefits of this concept, a VLC prototype was experimentally tested in an infrastructure-to-vehicle (I2V) VLC configuration, which uses an LED traffic light as the transmitter. At the receiver side, an automatic FoV adaptation mechanism was designed based on a mechanical iris placed in front of a photodetector. Adjustments were made based on the values recorded by a multi-angle light sensor, built with an array of IR photodiodes covering an elevation from 0° to 30° and an azimuth from −30° to 30°. Depending on the incidence of solar light, the mechanical iris can adjust the FoV from ±1° to ±22°, taking into account both the light irradiance and the sun’s position relative to the VLC receiver. For experimental testing, two identical VLC receivers were used: one with an automatic FoV adjustment, and the other with a ±22° fixed FoV. The test results performed at a distance of 50 m, in the presence of solar irradiance reaching up to 67,000 µW/cm2, showed that the receiver with a fixed FoV saturated and lost the communication link most of the time, whereas the receiver with an adjustable FoV maintained an active link throughout the entire period, with a bit error rate (BER) of less than 10−7.

Keywords

• field of view (FoV)
• noise-adaptive
• optical noise mitigation
• visible light communication (VLC)