Subtle Application of Electrical Field-Induced Lossy Mode Resonance to Enhance Performance of Optical Planar Waveguide Biosensor

Abstract

Many studies concern the generation of lossy mode resonances (LMRs) using metallic oxide thin films that are deposited on optical fiber. However, the LMR-based optical fiber sensors are frangible, do not allow easy surface modification, and are not suited to mass production. This study proposes an electrical field-induced LMR-based biosensor with an optical planar waveguide to replace surface modification and allow the mass production of protein biosensors and accelerate the speed of the analyte to decrease the detection time. Experimentally, the biosensor is evaluated using charged serum albumin molecules and characterized in terms of the LMR wavelength shift using an externally applied voltage for different durations. The externally applied voltage generates a significant electric field, which drives the non-neutralized biomolecules and increases the LMR wavelength shift. Our experimental results demonstrate that there are two different mechanisms of adsorption of serum albumin molecules for short-term and long-term observations. These are used to calculate the sensitivity of the biosensor. This electrical field-induced method is highly significant for the development and fabrication of LMR-based biosensors.

Keywords

• lossy mode resonance
• optical planar waveguide
• electrical-field
• biosensor
• bovine serum albumin
• sensitivity