Series LC DC circuit breaker

Abstract

The article proposes a mechanical DC circuit breaker (CB) based on a series LC circuit. It requires two switches (a fast disconnector and an AC circuit breaker), an inductor and a capacitor, and therefore the cost is expected to be low. A series LC circuit is analysed and it is concluded that fault current will always have natural zero-current crossings which enable use of simple AC CBs. The current commutation into a capacitor is investigated since this is important for successful operation. A number of analytical conditions are derived for the voltage stress across disconnector contacts which enable arc-less contact opening. Experimental results on a 900 V laboratory prototype LC DC CB illustrate successful DC fault clearing, with commutation of 130 A and peak DC current of 190 A. A detailed PSCAD model for 320 kV LC DC CB is developed and DC fault clearing is evaluated in order to understand the possible benefit for high-voltage direct current applications. Further comparisons with the commercialised hybrid DC CB and mechanical DC CB on 320 kV system illustrate some benefits in terms of performance and simplicity. The mechanical LC DC CB operates very fast because of early capacitor insertion, and this results in low peak current and energy dissipation.

Keywords

• fault currents
• LC circuits
• circuit breakers
• power inductors
• power capacitors
• HVDC power transmission
• current 130.0 A
• voltage 900.0 V
• voltage 320.0 kV
• current 190.0 A
• laboratory prototype LC DC CB
• simple AC CB
• natural zero-current crossings
• inductor
• low peak current
• DC fault clearing
• series LC DC circuit breaker
• energy dissipation
• mechanical LC DC CB
• mechanical DC CB
• commercialised hybrid DC CB
• high-voltage direct current applications
• peak DC current
• disconnector contacts
• current commutation
• fault current
• capacitor
• AC circuit breaker
• fast disconnector
• mechanical DC circuit breaker