Effect of proppant injection condition on fracture network structure and conductivity

Abstract

Abstract The hydraulic fracturing of shale reservoirs is an important topic, and adjusting the fracturing process can enhance fracturing efficiency. To analyze the effect of injection conditions on the fracture network structure and conductivity, numerical simulations and theoretical calculations are carried out based on the construction data, and the variation patterns of the fracture network parameters are determined. During the theory study, a fracture network conductivity model was obtained by combining the fracture network expansion model and the fracture diversion model. Then a numerical model was set up according to the analysis results of monitoring data. The numerical simulation results showed the fracture network structure and proppant distribution under different conditions. Throughout the simulation process, the structural parameters and conductivity of the fracture network can be determined by controlling the injection amount and adjusting the injection method, speed, and sand ratio. Results indicated that the proppant pulse frequency during the injection process was a major factor affecting the structure and conductivity of the fracture network. At the same time, a comparison of the distribution structure of the proppant revealed that although the intermittent injection of the proppant improved the flow channel, the efficiency of fracture utilization can still be improved.

Keywords

• fracture conductivity
• fracture network structure
• injection condition
• proppant transport