Experimental-numerical analysis of the fracture process in smooth and notched V specimens

Abstract

This paper presents the outcomes of quality tests conducted on specimens, both smooth and V-notched, subjected to uniaxial tension, which were extracted from a gas transport pipeline. The introduction of the V-notch introduced variations in the stress and strain component fields near the plane of maximum constriction, consequently leading to their failure through different mechanisms. The process included the implementation of quality management practices such as numerical modeling and simulation of the loading of the specimens using ABAQUS. The material model employed in these calculations was defined and verified to ensure quality control. Subsequent to the numerical calculations, maps of the stress and strain component fields were generated, contributing to the quality assessment of the specimens. It was determined that the quality management process for the smooth specimen identifies the initiation of failure primarily due to the normal stress component in the central region of the plane with the largest constriction. In contrast, in the V-notched specimen, quality management efforts revealed that failure initiation occurs due to the tangential stress component, and failure proceeds through the shear mechanism. These results are valuable in developing a quality-driven methodology for monitoring the operational safety of gas network pipelines, primarily based on the analysis of acoustic emission signals.

Keywords

• pipelines
• finite element method
• stress
• strain
• tresca criterion