Influence of Printing Angulation on the Accuracy (Trueness and Precision) of the Position of Implant Analogs in 3D Models: An In Vitro Pilot Study

Abstract

Background: With CAD-CAM, dental models are often fabricated by additive manufacturing (AM) methods. Dental models for implant prostheses involve the manual placement of analogs, which could affect their final fit. Therefore, in this experimental in vitro study, the accuracy of the analogs’ position in models printed using AM methods was examined by comparing three different printing orientations. Methods: An STL file was obtained by scanning a master model with an implant placed in the maxillary left central incisor position. Three study groups (n = 10) with varying printing orientation parameters were obtained (0, 45, and 90 degrees). They were digitalized with a laboratory scanner and evaluated with an analysis metrology program. Differences between 3D datasets were measured using the RMS for trueness and SD RMS for precision. The data were statistically analyzed using the ANOVA test at a significance level of p p p < 0.011) and between the 45- and 90-degrees groups (0.003). Conclusions: The printing angulation parameter affects the accuracy of 3D-printed models. Implant models manufactured at 45 degrees of printing angulation are more accurate than those printed at 0 or 90 degrees.

Keywords

• dental implant analog
• variation angulation
• digital impression
• 3D models
• build angle
• 3D printing