Effect of grit blasting on fatigue behavior of 2024-T3 aero Al alloy

Abstract

Aiming at the removal of native oxide film on 2024-T3 Al alloy before plasma electrolytic oxidation, the methods to reduce the fatigue damage caused by grit blasting are explored. Effects of the grit size and pressure on surface roughness, residual compressive stress (RCS), and fatigue life of the Al alloy are studied. Increasing grit size and pressure leads to the increase in the surface roughness and RCS. Based on the theorem of momentum and tool cutting principle, mechanism of the grits on the craters and RCS is revealed. It is found that the angularness of the small-sized grit results in the formation of long scratches. The grit with high kinetic energy induces the large craters and high RCS. The craters are the primary fatigue crack initiation source. Moreover, the craters with long scratch and large height lead to the premature fatigue failure of the grit blasted specimens. However, Fatigue behavior is insignificantly affected by the RCS. The results provide new insights into the fatigue deterioration mechanism and life optimization of the grit blasted samples. Consequently, a parameter optimization scheme for the fatigue life of the grit blasted Al alloy is proposed.

Keywords

• Al alloy
• Grit blasting
• Grit size
• Pressure
• Fatigue