An On-Chip Microscale Vacuum Chamber with High Sealing Performance Using Graphene as Lateral Feedthrough

Abstract

On-chip microscale vacuum chambers with high sealing performance and electrical feedthroughs are highly desired for microscale vacuum electronic devices and other MEMS devices. In this paper, we report an on-chip microscale vacuum chamber which achieves a high sealing performance by using monolayer graphene as lateral electrical feedthrough. A vacuum chamber with the dimensions of π × 2 mm × 2 mm × 0.5 mm is fabricated by anodically bonding a glass chip with a through-hole between two Si chips in a vacuum, after monolayer graphene electrodes have been transferred to the surface of one of the Si chips. Benefiting from the atomic thickness of monolayer graphene, the leak rate of Si–glass bonding interface with a monolayer graphene feedthrough is measured at less than 2 × 10−11 Pa·m3/s. The monolayer graphene feedthrough exhibits a minor resistance increase from 22.5 Ω to 31 Ω after anodic bonding, showing good electrical conductance. The pressure of the vacuum chamber is estimated to be 185 Pa by measuring the breakdown voltage. Such a vacuum is found to maintain for more than 50 days without obvious degradation, implying a high sealing performance with a leak rate of less than 1.02 × 10−16 Pa·m3/s.

Keywords

• on-chip
• microscale vacuum chamber
• graphene
• lateral feedthrough
• Paschen’s law