Atmospheric Measurement Techniques (Sep 2021)

Mass concentration estimates of long-range-transported Canadian biomass burning aerosols from a multi-wavelength Raman polarization lidar and a ceilometer in Finland

  • X. Shang,
  • T. Mielonen,
  • A. Lipponen,
  • E. Giannakaki,
  • E. Giannakaki,
  • A. Leskinen,
  • A. Leskinen,
  • V. Buchard,
  • V. Buchard,
  • A. S. Darmenov,
  • A. Kukkurainen,
  • A. Kukkurainen,
  • A. Arola,
  • E. O'Connor,
  • A. Hirsikko,
  • M. Komppula

DOI
https://doi.org/10.5194/amt-14-6159-2021
Journal volume & issue
Vol. 14
pp. 6159 – 6179

Abstract

Read online

A quantitative comparison study for Raman lidar and ceilometer observations, and for model simulations of mass concentration estimates of smoke particles is presented. Layers of biomass burning aerosol particles were observed in the lower troposphere, at 2 to 5 km height on 4 to 6 June 2019, over Kuopio, Finland. These long-range-transported smoke particles originated from a Canadian wildfire event. The most pronounced smoke plume detected on 5 June was intensively investigated. Optical properties were retrieved from the multi-wavelength Raman polarization lidar PollyXT. Particle linear depolarization ratios (PDRs) of this plume were measured to be 0.08±0.02 at 355 nm and 0.05±0.01 at 532 nm, suggesting the presence of partly coated soot particles or particles that have mixed with a small amount of dust or other non-spherical aerosol type. The layer-mean PDR at 355 nm (532 nm) decreased during the day from ∼ 0.11 (0.06) in the morning to ∼ 0.05 (0.04) in the evening; this decrease with time could be linked to the particle aging and related changes in the smoke particle shape properties. Lidar ratios were derived as 47±5 sr at 355 nm and 71±5 sr at 532 nm. A complete ceilometer data processing for a Vaisala CL51 ceilometer is presented from a sensor-provided attenuated backscatter coefficient to particle mass concentration (including the water vapor correction for high latitude for the first time). Aerosol backscatter coefficients (BSCs) were measured at four wavelengths (355, 532, 1064 nm from PollyXT and 910 nm from CL51). Two methods, based on a combined lidar and sun-photometer approach, are applied for mass concentration estimations from both PollyXT and the ceilometer CL51 observations. In the first method, no. 1, we used converted BSCs at 532 nm (from measured BSCs) by corresponding measured backscatter-related Ångström exponents, whereas in the second method, no. 2, we used measured BSCs at each wavelength independently. A difference of ∼ 12 % or ∼ 36 % was found between PollyXT and CL51 estimated mass concentrations using method no. 1 or no. 2, showing the potential of mass concentration estimates from a ceilometer. Ceilometer estimations have an uncertainty of ∼ 50 % in the mass retrieval, but the potential of the data lies in the great spatial coverage of these instruments. The mass retrievals were compared with the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2) meteorological and aerosol reanalysis. The inclusion of dust (as indicated by MERRA-2 data) in the retrieved mass concentration is negligible considering the uncertainties, which also shows that ceilometer observations for mass retrievals can be used even without exact knowledge of the composition of the smoke-dominated aerosol plume in the troposphere.