Smart Cities (Apr 2024)

An Update on Passenger Vehicle Speeds at Roundabouts

  • Enrique D. Saldivar-Carranza,
  • Myles W. Overall,
  • Darcy M. Bullock

DOI
https://doi.org/10.3390/smartcities7020039
Journal volume & issue
Vol. 7, no. 2
pp. 932 – 945

Abstract

Read online

The speed at which vehicles navigate through roundabouts is information that needs to be considered in the intersection design process, simulation model development, and policy implementation. The last published data on speed profiles by distance was the Federal Highway Administration (FHWA) Roundabouts: an Informational Guide report, published in 2000, which pre-dates the ability to collect large volumes of connected vehicle (CV) data. The objective of this paper is to use a large sample of CV data to provide empirical analysis on vehicle speeds at roundabouts and to determine if previous guidelines are still applicable. Over 15 million speed records sampled at 56 roundabouts in Carmel, Indiana, from February to May 2023 during weekdays are categorized by turn type (i.e., right, through, or left) and by roundabout section (i.e., approach, circulation, or departure). Speed profiles and distributions for each category are analyzed by four different time-of-day (TOD) periods. The speed distribution analysis by roundabout section shows that 85% of vehicles travel under 34, 22, and 35 miles per hour (mph) on the approach, circulation, and departure zones, respectively. The analysis by turn type indicates that vehicles making left turns consistently maintain speeds below 20 mph when navigating inside roundabouts. In contrast, vehicles proceeding straight through or turning right accelerate soon after entering. Regardless of turn-type or TOD periods, most vehicles depart the roundabouts at similar speeds around 35 mph. A comparison between sampled and theoretical speed profiles reveals that while a state-of-the-practice model accurately estimates vehicle accelerations and decelerations near roundabouts, it does not account for reduced speeds before circulation begins and, in some cases, underestimates values on the circulation and departure sections. The results presented in this paper can be used to update current knowledge on vehicle speeds at roundabouts. Furthermore, local and state transportation agencies can use the presented technique to periodically update travel speed knowledge for their roundabouts where CV data or detection technology to derive traveling speeds is available.

Keywords