Electro-Optical Characteristics of Solution-Derived Zinc Oxide Film According to Number of Rubbing Iterations for Liquid Crystal Alignment

Abstract

Zinc oxide (ZnO) films reportedly exhibit a rubbing effect for liquid crystal (LC) alignment. In this study, we investigated the LC alignment characteristics of solution-derived ZnO films according to the number of rubbing iterations. Uniform and homogeneous LC alignments were achieved on the rubbed ZnO films, regardless of the number of rubbing iterations. As the number of rubbing iterations increased, the surface energies of the rubbed ZnO films were similar to 42.20 mJ/m2, but the polar energy increased from 4.288 mJ/m2 to 6.470 mJ/m2. Additionally, the electro-optical characteristics of the twisted-nematic (TN) LC cells fabricated by rubbed ZnO films showed the best performance when the number of rubbing iterations was at five. By confirming that the ZnO film with improved physical, chemical, and electro-optical characteristics compared to the polyimide film achieved a perfect LC alignment through the conventional rubbing process, it indicates that the ZnO film can be an excellent substitute for the LC alignment film. In addition, it is expected that it can be applied to an LC-based virtual reality (VR)/augmented reality (AR) display system that requires a very fast response time through the excellent EO characteristics of the TN LC cell of the solution-derived ZnO film through the rubbing process.

Keywords

• liquid crystal alignment
• zinc oxide
• solution process
• rubbing method
• electro-optical characteristics