Comparing water and paraffin PCM as storage mediums for thermal energy storage applications

Abstract

A CFD analysis is performed in two different heat storage mediums, water and paraffin phase change material (PCM), in order to evaluate and compare the two mediums for use in heating thermal energy storage (HTES) applications. The two mediums use different heat storing mechanisms, namely water uses Sensible Heat Storage, and the PCM Latent heat storage. The applied computational domain represents a single tube of a heat exchanger (HE), and so it comprises of a copper tube with aluminium fins. The geometric characteristics of the domain are taken in accordance with commercially used HE’s for HTES applications [1]. The characteristics studied are the stored energy of the system, the temperature of the heat transfer fluid (HTF) in the outlet and the temperature of the storage medium. The results of the simulations showed that for the same mass of storage mediums, the PCM can store more energy than water, for the same temperature of the HTF, as expected. Also, the temperature of the medium for the sensible heat storage rises linearly with the energy stored inside it, while in the latent heat storage mechanism, the temperature of the medium rises linearly till the melting (or solidification) of it, then stays almost steady until the melting of the whole volume and then rises again until it reaches the temperature of the HTF.