Permeability Prediction for Carbonate Rocks using a Modified Flow Zone Indicator Method

Abstract

Carbonate reservoir rocks are usually heterogeneous, so it is not an easy task to establish a relation between porosity and permeability in these types of reservoir rocks. First, Kozney and Kozney-carmen formulas were used to establish these relations. Later, the flow zone indicator (FZI) method was introduced, which was widely used to find such a relation since it shows better results than the two former methods. In this work, the classical FZI method and a modified form of the FZI method are utilized to identify the hydraulic flow units and rock quality index to predict permeability. In this FZI method, the cementation factor (m) was introduced in calculating the value of FZI. The data collected from core analysis of the cored intervals in the Tanuma and Khasib formations were used as a database for this work. The classical and the modified FZI methods were applied using the database to predict core permeability. The value of the cementation factor was tuned to get a better match between the predicted permeability resulting from applying the modified method and the measured permeability values. Results show that the correlation coefficients resulting from applying the modified FZI method are closer to unity compared with that resulting from the classical FZI method. Cementation factor (m) of m = 3 for Tanuma formation and m = 3 for Khasib formation are the best values used with the modified FZI method. The modified FZI method shows a regression factor of 0.9986 for Tanuma and 0.9942 for Khasib formation.

Keywords

• Cementation factor
• FZI
• Hydraulic flow unit
• Modified FZI
• Permeability prediction