Next Sustainability (Jan 2025)
Carbonization of golden shower pods to high surface area biochar for decontamination of cationic dyes and regeneration study by gamma radiations
Abstract
Detoxification of water resources is the need of the hour and a number of environment friendly materials are proposed by scientist to deal with water pollution issues. The present study deals with preparation and characterization of porous activated carbon from golden shower pods, a waste ligno-cellulosic biomass, for the removal of dye contaminants from aqueous solution. The synthesized material, golden shower biochar (GSBC) was characterized using various analytical techniques to confirm the presence of active sites. The BET analysis of GSBC revealed high surface area of 1120 m2/g with total pore volume of 1.099 cm3/g and average pore radius 19.618 Å. Operational parameters were optimized using batch studies by taking GSBC dose of 50 mg which showed complete removal of target dyes with an initial dye concentration of 200 mg/L with just 60 min interaction time; based on these results, a fixed bed column of GSBC was designed and column studies were performed. Adsorption isotherm studies were carried out using Langmuir and Freundlich models, of which Langmuir model was found to be best-fit with maximum adsorption capacities of 208.86 mg/g, 284.35 mg/g and 327.56 mg/g for Crystal violet, Brilliant green and Methylene blue dyes respectively. Analysis of kinetics and thermodynamics revealed that the best-fit model was pseudo second-order with spontaneous reaction course and exothermic nature. Regeneration was carried out using gamma irradiation of dye loaded GSBC, followed by leaching in alcohol. It was observed that a 30 KGy dose was just sufficient to completely degrade the dye on the adsorbent surface. GSBC has shown immense potential for eradication of dyes from water effluents and it is easily recovered with negligible loss in efficacy.
