Micromechanical model of shape memory polymer including temperature-strain history dependence

Abstract

Shape memory polymers (SMPs) have thermomechanical property drastically altering around the glass-transition temperature (Tg), temporary shape fixity and shape recovery property, and so on. To understand the mechanisms of such unique properties and design products including SMPs optimally, a mathematical model which is simple yet can represent these properties reasonably and accurately is necessary. Especially, it is important for the model to be able to consider the effect of temperature and strain history on the properties because the properties are considered to depend on not only the temperature and the strain themselves but also their history. Therefore, in this paper first the effect of the temperature and strain history on the shape fixity and shape recovery properties was examined. Then, a micromechanical model of SMP was developed to describe this effect. This model consisted of a lot of unit elements having four springs, two dash pots, one latch, and one thermal expansion element. Different Tg was assigned to each element because Tg depends on local condition inside of SMP and distributed in general. It was found from the experiment that the temperature and strain history applied to SMP when the shape is gradually frozen has an influence on the shape recovery process. With respect to the model, it was shown that the proposed micromechanical model can capture the thermomechanical behaviors of SMP and, especially, the temperature and strain histories dependence on the shape recovery process quite well.

Keywords

• shape memory polymer
• shape memory materials
• phase transformation
• constitutive equation
• inelasticity
• visco elasticity
• micromechanical model
• thermomechanical property