Micromachines (Feb 2020)

Effects of Top-hat Laser Beam Processing and Scanning Strategies in Laser Micro-Structuring

  • Hoang Le,
  • Pavel Penchev,
  • Anne Henrottin,
  • David Bruneel,
  • Vahid Nasrollahi,
  • Jose A. Ramos-de-Campos,
  • Stefan Dimov

DOI
https://doi.org/10.3390/mi11020221
Journal volume & issue
Vol. 11, no. 2
p. 221

Abstract

Read online

The uniform energy distribution of top-hat laser beams is a very attractive property that can offer some advantages compared to Gaussian beams. Especially, the desired intensity distribution can be achieved at the laser spot through energy redistribution across the beam spatial profile and, thus, to minimize and even eliminate some inherent shortcomings in laser micro-processing. This paper reports an empirical study that investigates the effects of top-hat beam processing in micro-structuring and compares the results with those obtainable with a conventional Gaussian beam. In particular, a refractive field mapping beam shaper was used to obtain a top-hat profile and the effects of different scanning strategies, pulse energy settings, and accumulated fluence, i.e., hatch and pulse distances, were investigated. In general, the top-hat laser processing led to improvements in surface and structuring quality. Especially, the taper angle was reduced while the surface roughness and edge definition were also improved compared to structures produced with Gaussian beams. A further decrease of the taper angle was achieved by combining hatching with some outlining beam passes. The scanning strategies with only outlining beam passes led to very high ablation rates but in expense of structuring quality. Improvements in surface roughness were obtained with a wide range of pulse energies and pulse and hatch distances when top-hat laser processing was used.

Keywords