This article describes the problems associated with distributed electrical power generation and the most frequent interruptions occurring in power grids. The most common methods of improving the quality of the power supply were analyzed and the possibilities offered by energy storages in this respect were considered. The operating parameters of an exemplary PV system connected to the power grid were analyzed. For this purpose, the model implemented in the Matlab/Simulink environment was used. Based on the conducted analysis and a review of the literature, conclusions were drawn and solutions were presented which could improve the quality and the reliability of power supply. The simulations conducted focused on the co-operation of individual photovoltaic, micro-installations, with rated powers of 12.2, 19.825, and 39.65 Kw in the power grid, which also corresponds to the co-operation of several, smaller micro-installations with low density.
