Physical Properties of Silver Fir (Abies alba L.) Wood Cladding Modified by Traditional Japanese Charring Method

Abstract

Silver fir (Abies alba L.) wood samples were charred on one surface using an enhanced version of the traditional Japanese Yakisugi method. The 15 charred boards obtained from five charring chimneys were divided into three different zones and investigated for their physical properties. The density profile, water absorption after 24 h of water submersion, and Brinell hardness were analyzed. In general, the temperature-time regime, which causes inside surface carbonization, was more evident at the bottom than at the top of the chimney. The density profile of the specimens revealed that the surface charring treatment decreased the surface density of the wood significantly. A gradient was visible from 383 kg/m² at the bottom to 424 kg/m² at the top. Water absorption measurements showed that a thicker carbonized layer could take up more water as a result of increased porosity. While 3,684 g/m² were absorbed at the bottom, the top accounted for only 2,533 g/m². Furthermore, with increasing thickness of the charred layer, the hardness gradually decreased. The average of the charred specimens reached only 3.2% of the hardness of the uncharred back side of the specimens.

Keywords

• wood charring
• wood cladding
• surface charring
• thermal degradation
• yakisugi method
• wood modification