Synthesis of varied oleic acid-coated Fe3O4 nanoparticles using the co-precipitation technique for biosensor applications

Abstract

This study successfully synthesized oleic acid (OA)-coated Fe3O4 nanoparticles using the coprecipitation method for the needs of biosensor applications, as shown through the characterization of structure and morphology using XRD and TEM. This observation used 0.75 ml of OA (Fe3O4-OA(0.75)) and 1.25 ml of OA (Fe3O4-OA(1.25). A decrease in particle size distribution from 18.55 nm to 16.30 nm was observed, which means a reduction in agglomeration and increased dispersibility. Vibrating Sample Magnetometer (VSM) observations showed that the saturation magnetization of Fe3O4 particles modified with OA decreased from 47.71 emu/g to 45.90 emu/g at Fe3O4-OA(0.75) and decreased again to 42.29 emu/g at Fe3O4-OA(1.25). But they all show soft ferromagnetic properties with very low coercivity, making them suitable for Giant Magnetoresistance (GMR) biosensor applications. A series of concentrations in ethanol solution were performed to evaluate the detection sensitivity of GMR for these pure and oleic acid-modified Fe3O4 samples. Concentrations of 2, 5, 10, 15, 25, and 35 mg/ml were integrated at 2 μL each onto the surface of the GMR chip. A decrease in sensitivity was observed due to the change in saturation. Pure Fe3O4 with a sensitivity of 5.07 mV (mg/ml) decreased to 4.49 mV (mg/ml) and 3.35 mV (mg/ml) after oleic acid coating. Thus, although adding a proportional amount of oleic acid can slightly decrease the saturation magnetization, it can be a valuable method for applications such as GMR biosensors that demand high dispersibility and sensitivity that remains strong.

Keywords

• Soft ferromagnetic
• Co-precipitation
• GMR
• Biosensor
• Sensitivity