Effect of 5-Amino-1H-Tetrazole on Combustion Pyrolysis Characteristics and Kinetics of a Combustion Tear Gas Mixture

Abstract

Taking the combustion tear gas mixture as the research object, the system formula was optimized by adding a different mass fraction of 5-amino-1H-tetrazole(5AT). TG-DSC, a thermocouple, and a laser smoke test system were used to characterize the characteristic combustion parameters such as combustion temperature and velocity, as well as the end-point effects such as smoke concentration and particle size. Starink’s method, the Flynn–Wall–Ozawa method, and the Coats–Redfern method were used to evaluate the pyrolysis kinetic parameters of the samples. The results show that when the mass fraction of 5-amino-1H-tetrazole in the system is 10%, the maximum combustion temperature of the sample decreases by nearly 70 °C and the smoke concentration increases by 12.81%. The kinetic study also found that with a different mass fraction of 5-amino-1H-tetrazole in the system, the main reaction model of the mixed agent in the first, third, and fourth stages of pyrolysis changed significantly, but for the second stage of sample pyrolysis, the main reaction model (the A4 model) showed a high degree of consistency, which can be considered as the thermal diffusion stage of the tear agent capsicum oleoresin (OC) (the temperature range is 220~350 °C), which is highly consistent with the results of the TG-DSC analysis. It was also confirmed that OC’s thermal diffusion is mainly concentrated in this stage. The results of this study show that adding an appropriate amount of the combustible agent 5-amino-1H-tetrazole to the combustion tear gas mixture can improve its combustion performance and smoking performance, which provides an important, new idea for the development of a new generation of safe, efficient, and environmentally friendly tear gas mixtures.

Keywords

• 5-amino-1H-tetrazole
• tear gas mixture
• combustible agent
• combustion pyrolysis characteristics
• dynamics research