Assessment of process-induced cracks in hot-working operations using crack susceptibility index based on plastic instability criteria

Abstract

A processing map representing the efficiency of power dissipation as a function of the temperature and strain rate has been used as a guide to depict the hot workability of metallic alloys. However, it has limitations in indicating the local positions where process-induced cracks may occur during hot-working operations. A process-induced crack is formed during hot deformation because the plastic instability associated with crack formation is more favorable than normal flow under a given set of process conditions. This paper proposes a novel approach to assess local cracks using the crack susceptibility index (CSI), which is based on Ziegler's plastic instability criteria. This solution provides useful information regarding the effect of each process parameter on the workability required for high-temperature processes. Lowering the CSI value by controlling process variables, such as the temperature and strain rate, is recommended for a design free from process-induced cracks. More importantly, a coded finite element subroutine coupled with the CSI can help visualize local positions where cracks may be produced during a hot-working operation. For experimental validation, a Gleeble test was performed on Ti6Al4V specimens containing four notches with different depths. The successful application of the CSI to the process design of shop-floor unmanned aircraft components helped confirm the applicability and validity of this study.

Keywords

• Crack susceptibility index
• Deformation processing map
• Plastic instability criteria
• Ziegler's parameter
• Hot working