Soil shear strength as a function of NSPT via Van der Veen extrapolation

Abstract

Abstract In this study, a ground anchored wall located in Belo Horizonte containing 295 anchorages in a sandy silt soil was analyzed. The load capacity of all the anchors was calculated by extrapolation of the receipt tests by the Van der Veen method through the CsAGeo web application. The shear strength in the soil-anchor interface was obtained from a semi-empirical method. Two criteria to analyze the extrapolated curves of Van der Veen were used. In the first criteria, the shear strengths of all the extrapolated curves were calculated. In the second criteria, only those curves from the extrapolations considered as reliable were used to calculate the shear strengths. The main objective of this work is to set up the value of shear strength at the soil-anchor interface through extrapolation of the mathematical and semi-empirical methods. The semi-empirical method was carried out in soil and executive methodology equal to the work analysed, which increases the accuracy of these values contributing to containments using anchors. The results were grouped according to the ranges of the penetration resistance (NSPT). An increasing tendency was identified in the shear strength as the value of the resistance to penetration increased. In addition, the linear tendency was observed for the reliable curves.

Keywords

• anchor
• load capacity
• shear strength