PLoS ONE (Jan 2022)

Dynamic analysis of lathe bed of woodworking CNC machining center based on the modeling of joint surface.

  • Yin-Kun Sun,
  • Jun Hua,
  • Yan-Na Li,
  • Guang-Wei Chen,
  • Ming-Hui Liu

DOI
https://doi.org/10.1371/journal.pone.0277919
Journal volume & issue
Vol. 17, no. 11
p. e0277919

Abstract

Read online

Based on the finite element theory, a joint-plane modeling method is employed to connect the corresponding nodes at the joint surface of the woodworking computer numerical control (CNC) machining center bed with a 2-node 12-degree-of-freedom unit. A spatial element model is established, which can show the state of the nodes between joint surfaces when they are stretched, compressed, or twisted; and it can help build a woodworking CNC machining center on a finite element model of bed with the characteristics of the joint surface. The simulated analysis is performed on the model and is compared with the result of simulated analysis on the bed model that ignores the characteristics of the joint surface and modal experiment. The comparison verifies the effectiveness of the modeling method based on the characteristics of the joint surface. The weak link of the machine bed structure is analyzed and optimized. The natural frequency of the bed is improved by2.55% ~ 11.3%. The displacement is reduced by a maximum of 19.4%, and dynamic performance of the bed is improved.