Enlightenment of Deionized‐Water Bathing IGZO TFTs

Abstract

Abstract At present, amorphous indium–gallium–zinc oxide (IGZO) semiconductor has become the most commonly used semiconductor material and is widely used in flat panel displays and various sensors, but its performance is greatly affected by environmental factors, especially water. This study investigates the instability of IGZO thin‐film transistors (TFTs) soaked in deionized water. After 24 h bathing, the field‐effect mobility and threshold voltage change a little, but the subthreshold swing, positive bias stress and negative bias stress stability undergo clear degradation. Through comprehensive examination of the changes in the chemical composition, surface morphology and thickness of the IGZO films, it's found that IGZO experiences selective etching by deionized water, and consequently the film surface becomes rough and rich of In and oxygen vacancies, which can explain the variations on device performance well. In addition to the bathing experiment performed on In2O3, Ga2O3, and ZnO TFTs, a schematic image of the reaction between water and IGZO is depicted, showing the preferential loss of Ga and Zn located next to the oxygen vacancy.

Keywords

• amorphous oxide semiconductors (AOSs)
• deionized water
• indium gallium zinc oxide thin‐film transistors (TFTs)
• oxygen vacancies