Sustainable Chemistry for the Environment (Jun 2024)
Conversion of beechwood organosolv lignin via fast pyrolysis and in situ catalytic upgrading towards aromatic and phenolic-rich bio-oil
Abstract
Lignin, an abundant renewable biopolymer found in plant cell walls, is enriched in phenolic units within its complex molecular structure. Unlocking its potential as alternative feedstock in (bio)refining has posed a long-standing challenge, even though it holds immense promise for replacing fossil-derived phenolic and aromatic compounds. This study focuses on fast pyrolysis as effective thermochemical depolymerization method of lignin, coupled with the in situ catalytic upgrading aiming to produce valuable bio-oil enriched in dealkoxylated (alkyl)phenolic and aromatic compounds. Lignin was isolated via the organosolv process from beechwood sawdust (hardwood biomass). Various acidic aluminosilicate catalysts (e.g., zeolites, such as ZSM-5, Beta and USY, and amorphous silica alumina) were applied, having different Si/Al ratio, porous and acidic properties. Fast pyrolysis experiments were conducted on a fixed-bed bench-scale reactor at two distinct temperatures (500 and 600 °C), employing different contact times and lignin-to-catalyst ratios. Non-catalytic pyrolysis experiments revealed that higher temperature, significantly influences bio-oil’s composition and yield, resulting in the conversion of initially formed alkoxy-phenols to alkyl-phenolic compounds, reaching a 47% relative concentration at 600 °C, while also yielding high amount of bio-oil up to 43 wt%. Among the catalysts tested, zeolite ZSM-5 (Si/Al=40) proved to be the most efficient, shifting the chemical profile of bio-oil from phenolic to aromatic (mainly BTX) with relative concentration of 57%, owing to its unique microporous structure and acidity. Depending on the catalyst type, a balance between BTX monomer aromatics and naphthalenes was observed. Lignin, as well as the obtained products (bio-oil, non-condensable gases, char/coke-on-catalyst) were thoroughly characterized using various analytical techniques. The catalytic upgrading results were associated with the physicochemical properties of the catalysts, providing valuable insights into the underlying reaction mechanisms.
