Experimental study on shear mechanical properties of cement mortar specimen with through-step joints under direct shear

Abstract

In this study, direct shear tests were carried out on cement mortar specimens with singleladder, single-rectangular, and double-rectangular step joints. Consequently, the shear strength, and crack shape of specimens with these through-step joints were analyzed, for understanding the influence of the through-step joint’s shape on the direct shear mechanical properties. The results of the investigation are as follows: (1) Under the same normal stress, any increases in the height ℎ of the step joint causes an initial-increase-decrease in the shear strengths of specimens with single-ladder and double-rectangular step joints, causing a type-Wvariation pattern for the specimens with single-rectangular step joint. More essentially, when normal stress and ℎ are constant, the shear strength of specimens with a single-ladder step joint is the greatest, followed by specimens with a double-rectangular step joint, and then specimens with a single-rectangular step joint is the least. (2) Furthermore, given a smallℎ and low normal stress, specimen with a single-ladder step joint mainly experiences shear failure, whereas specimens with single-rectangular and double-rectangular step joints mainly generate extrusion milling in the step joints.

Keywords

• artificial rock specimen
• ladder step joint
• rectangular step joint
• height of step joint
• shear strength