THE EFFECTS OF ADHESIVE RATIO AND PRESSURE TIME ON SOME PROPERTIES OF ORIENTED STRAND BOARD

Abstract

This study was carried out to determine the effects of adhesive ratio and pressure time on thickness swelling (TS), internal bond (IB), modulus of rupture (MOR), and modulus of elasticity (MOE) properties of oriented strand board (OSB). For this purpose, 80 mm long strands made of Scots pine (Pinus sylvestris L.) were bonded with phenol-formaldehyde resin at three different ratios (3, 4.5, and 6%) to produce three-layer cross-aligned OSBs. Strands used for the production of OSB panels were made up 40% of core layer and 60% of outer layers. The panels were pressed for three different press times, from 3, 5, to 7 minutes, under 0.4 MPa pressure, aiming for a target density of 0.70 g/cm3. TS, IB, MOR, and MOE properties of OSB panels were evaluated according to the standards (TSE EN 117-319-310). Results showed that MOR and MOE values were changed in the ranges 25.31 to 42.27 N/mm2, and 2848.90 to 6545.63 N/mm2, respectively. Also, the results showed that as adhesive ratio and pressure time increased, the TS, MOR, and MOE values increased too.

Keywords

• Oriented strand board
• Strand alignment
• Phenol-for maldehyde
• Physical properties
• Mechanical properties