Spark Plasma Sintering (SPS) of Multi-Principal Element Alloys of Copper-Niobium-Titanium-Di-Boride-Graphite, Investigation of Microstructures, and Properties

Abstract

A near-equiatomic multi-principal element alloy of Cu40Nb30(TiB2)20C10 with both nano-particle size (14 nm) and micron-particle sizes (−44 µm) of Nb was designed and made via the spark plasma sintering technique at two different sintered temperatures of 650 °C and 700 °C with other SPS parameters being constant. The sintering mode, microstructures, microhardness, density, relative density, wear behavior, and corrosion properties of the alloys were investigated and compared to ascertain the best for aerospace applications. The SPS technique was applied to produce the tested samples in this study. The results showed that the alloys with nano-particles of Nb sintered faster, with the lowest wear rate, and their microstructure shows a dendritic configuration with the existence of graphite-rich and niobium-rich nano-segregations in the inter-dendritic areas with the lowest coefficient of friction, Cu-NbTiB2C with nano-particles of Nb sintered at 650 °C recorded the highest microhardness value (786.03 HV0.2), and CuNbTiB2C with micro-particles of Nb sintered at 700 °C exhibited the best anti-corrosion characteristics in a sulphuric acid environment. The results obtained in this study correspond to the requirements for high-performance engineering materials, which will make the novel materials relevant in the aerospace industry.

Keywords

• spark plasma sintering
• Cu-Nb-TiB₂-C
• sintering mechanisms
• microstructure
• wear and corrosion