Theory and experimental research on spiral bevel gear by double-side milling method

Abstract

In this paper, a double-side milling method on spiral bevel gear is proposed. First, according to the tooth taper processed by double-side milling method, the influence of dedendum angle on the tooth taper was researched. Taking cut parameters into comprehensive consideration, the geometric parameters were designed through the inclination of root line and modified mean point in which machine setting parameters calculated was selected. Only the modified mean point met the meshing equation, and the error of pressure angle would increase as far away from the modified mean point in tooth line. The error would lead to bias in contact. A helical correction motion was introduced and the influence of helical motion coefficient on tooth surface topology was studied. Based on the meshing performance, a suitable coefficient was calculated. Finally, an example was illustrated. The experimental results were consistent with the theoretical analysis. The validity of the proposed method is verified.

Keywords

• spiral bevel gear
• double-side milling method
• geometric parameter design
• modified mean point
• helical motion
• cutting experiment