Fuel Processing Technology (Nov 2024)

Highly efficient Co-added Ni/CeO2 catalyst for co-production of hydrogen and carbon nanotubes by methane decomposition

  • Jae-Rang Youn,
  • Min-Jae Kim,
  • Ki Cheol Kim,
  • Mincheol Kim,
  • Taesung Jung,
  • Kang-Seok Go,
  • Sang Goo Jeon,
  • Woohyun Kim

Journal volume & issue
Vol. 263
p. 108130

Abstract

Read online

The catalytic decomposition of methane (CDM) is a hydrogen and nanostructured carbon production process with minimal CO2 emission. Among the transition metal-based catalysts (e.g. Ni, Fe, Co, etc.), Ni-based catalysts are most widely studied due to the higher catalytic activity in decomposing methane. However, the limited lifespan of the catalyst makes it unsuitable for practical applications. Effective methane decomposition catalysts should be designed to optimize both reaction efficiency and catalyst lifetime. A Ni/CeO2 catalyst, developed in previous studies, Co was added to promote low-temperature (< 700 °C) activity manipulating the redox property of Co. Among the prepared catalysts with varying Ni:Co ratio, the methane conversion rate of the Ni8Co2/CeO2 catalyst was approximately twice that of the Ni10/CeO2 catalyst, confirming its excellent low-temperature activity. The reaction rate of Ni8Co2/CeO2 catalyst was 4.38 mmol/min∙gcat at 600 °C with WHSV of 36 L/gcat∙h. In terms of characteristics of carbon products, Raman spectroscopy analysis revealed that the carbon grown on the catalyst surface exhibited high crystallinity, with D-G band ratio (ID/IG) of 1.01. The fresh and used catalyst samples were characterized by TEM, XPS, XAS, and other methods to analyze the parameters affecting catalytic activity.

Keywords