Experimental Study on Post-Grouting Pile Vertical Bearing Performance Considering Different Grouting Methods and Parameters in Cohesive Soil

Abstract

The selection of grouting methods and parameters significantly affects the improvement in the pile-bearing capacity of cast-in-place bored piles. This study proposes a comprehensive set of test methods for constructing model piles, performing grouting at the pile tip and pile side. A series of single-pile grouting and static load tests were conducted using these test methods. The results reveal that pile-side grouting is more effective in controlling pile settlement compared to tip grouting. Furthermore, tip-side-combined grouting exhibits superior reinforcement effects compared to the other two grouting methods. After grouting, a grout bubble is formed at the outlet, consisting of a compact diffusion zone internally and a split diffusion zone externally. Additionally, a vertical diffusion of grout occurs along the pile body, establishing a lateral friction resistance enhancement region. Within this region, the lateral friction resistance of the pile shows a negative correlation with the distance from the grouting outlet. The test results emphasize the significance of grouting volume and its impact on the bearing capacity, settlement control, lateral friction resistance, and grout bubble size in grouted piles, while the influence of variation in grouting pressure in a small range on bearing characteristics is not significantly apparent.

Keywords

• cast-in-place pile
• post-grouting
• grouting volume
• grouting pressure
• grout diffusion range