Phase Change Materials with Enhanced Thermal Conductivity and Heat Propagation in Them

Abstract

The review contains information o; n the properties of phase-change materials (PCM) and the possibilities of their use as the basis of thermal energy storage. Special attention is given to PCMs with a phase transition temperature ranging between 20 and 80 °C since such materials can be effectively used to reduce temperature variations in residential and industrial rooms. Thus, the application of PCMs in the construction industry enables one to considerably reduce the power consumption and reduce the negative environmental impact of industrial facilities. Thermophysical characteristics of the main types of PCMs are presented. The heat balance for a room with walls made of PCM-added materials is estimated. The calculations demonstrate that such structures can stabilize the temperature in practical applications as a result of the usage of such materials. The construction of a thermal accumulator on the basis of PCM is proposed and analyzed. This facility uses water as a working fluid and paraffin as a PCM. The thermal accumulator has a modular structure so that the number of similar modules is determined by the quantity of energy to be stored. The potential of wide application of PCMs as a basis for thermal energy storage is rather limited due to a very low conductivity (less than 1 W/(m K)) inherent to these materials. This drawback can be overcome by adding carbon nanoparticles whose thermal conductivity is four to five orders of magnitude greater than that of the matrix material. The problem of fabrication of polymer composites with enhanced thermal conductivity due to nanocarbon particles doping is discussed in detail.

Keywords

• phase change materials
• thermal conductivity
• carbon nanoparticles