Materials (Jul 2023)

Effect of a Multiaxial Load of Reverse Torsion on Open-Cell Aluminum Foams Behavior

  • Solomon Bayu Huluka,
  • Rachid Baleh,
  • Naser A. Alsaleh,
  • Adel Alfozan,
  • Akrum Abdul-Latif,
  • Sabbah Ataya

DOI
https://doi.org/10.3390/ma16145136
Journal volume & issue
Vol. 16, no. 14
p. 5136

Abstract

Read online

As a main goal of this work, a novel generation of cellular materials has been developed and manufactured by the kelvin cell model to be offered for different multifunctional applications. These Open-Cell Aluminum Foams (OCAF) have 85% porosities of spherical-shaped pores with a diameter of 11 mm. Several foamed square-section specimens were used. This work investigated the impact of different new quasi-static biaxial loading complexities on the mechanical behavior of such foams. Thus, new S-profiled rigs were already designed for examining the behavior of tested foams under biaxial loading conditions with different reverse torsional components named ACTP-S. After testing, their high specific strength and high energy absorption abilities have been characterized. Thus, in addition to the reference uniaxial test, all other tests were conducted at a speed of 5 mm/min. Thus, the mechanical responses of this foam are affected by loading complexities which are simple uniaxial, intermediate-biaxial (Bi-45°), and sever-biaxial (Bi-60°). These results were compared to the classical Absorption using Compression-Torsion Plastique (ACTP) responses. It was concluded that the highest dissipated energy increases with the increase in loading path complexity. Note that the energy absorption of the foam is essentially governed by its collapse mode.

Keywords