Atmosphere (Sep 2023)
Study on Dynamic Characteristics of Magnetic Coagulation of Fe-Based Fine Particles in Iron and Steel Industry
Abstract
Fine dust, represented by Fe-based fine particles and emitted from the production process of the iron and steel industry, is the primary factor causing many diseases represented by industrial pneumoconiosis, and ultra-low dust emission has always been a thorny problem to be solved urgently. To explore the magnetic coagulation effect of Fe-based fine particles in the magnetic field when removing them from industrial flue gas by the magnetic field effect in the iron and steel industry, using FLUENT software, magnetic dipole force was added between particles through user defined function (UDF) based on the computational fluid dynamics-discrete phase model (CFD-DPM) method so that the collision process of particles was then equivalent to their mutual trapping process. Next, the effects of particle size, particle volume fraction, external magnetic field strength, and particle magnetic susceptibility on the magnetic coagulation process were comprehensively studied. Meanwhile, the proton balance equation (PBE) was solved using the partition method on the basis of the computational fluid dynamics-population balance model (CFD-PBM) to compare the coagulation removal effect under random and aligned orientations of magnetic dipoles, respectively. The results showed that the magnetic coagulation strength under the random orientation of magnetic dipoles was greater than that under the aligned orientation. When the particle size of Fe-based fine particles increased from 0.5 μm to 1.5 μm, the magnetic coagulation coefficient decreased from 0.5414 to 0.2882, and the difference in the removal efficiency under the two different orientations of magnetic dipoles became smaller. When the particle volume fraction increased from 0.01 to 0.03, the magnetic coagulation coefficient increased from 0.2353 to 0.5061, and the difference in the removal efficiency under two orientations was enlarged. When the applied external magnetic field strength increased from 0.5 T to 1.0 T, the magnetic coagulation coefficient increased from 0.3940 to 0.5288, and the magnetic susceptibility increased from 0.0250 to 0.0500, the coagulation coefficient increased from 0.3940 to 0.5288, and the difference under two orientations basically stayed unchanged.
Keywords
