Web Bend-Buckling of Steel Plate Girders Reinforced by Two Longitudinal Stiffeners with Various Cross-Section Shapes

Abstract

This work performs an investigation into the optimal position of two longitudinal stiffeners with different cross-section shapes such as open section (L-shaped and T-shaped) and closed section (rectangular and triangular shapes) shapes of stiffened plate girders under bending loading through an optimization procedure using a gradient-based interior point (IP) optimization algorithm. The stiffener optimum locations are found by maximizing the bend-buckling coefficient, kb, generated from eigenvalue buckling analyses in Abaqus. The optimization procedure efficiently combines the finite element method and the IP optimization algorithm and is implemented using the Abaqus2Matlab toolbox which allows for the transfer of data between Matlab and Abaqus and vice versa. It is found that the proposed methodology can lead to the optimum design of the steel plate girder for all stiffener cross-section types with an acceptable accuracy and a reduced computational effort. Based on the optimization results, the optimum positions of two longitudinal stiffeners with various cross-section shapes are presented for the first time. It is reported that the optimum locations of two longitudinal stiffeners with open cross-section shapes (T- and L-shaped) are similar to that of flat cross-section, while the optimum positions of two longitudinal stiffeners with closed cross-section types (rectangular and triangular sections) are slightly different. One of the main findings of this study is that the bend-buckling coefficient of the stiffened girder having stiffeners with triangular cross-section shape is highest while that with flat cross-section shape is lowest among all considered stiffener types and this latter case has minimum requirement regarding the web thickness.

Keywords

• Abaqus2Matlab
• longitudinal stiffeners
• optimization procedure
• steel plate girders
• web bend-buckling