Effect of shot peening on surface characteristics and high-temperature corrosion behaviour of super 13Cr martensitic stainless steel

Abstract

Super 13Cr, as an economy stainless steel (SS) for oil country tubular goods, needs stable corrosion resistance in high-pressure and high-temperature (HPHT) downhole medium. Severe plastic deformation (SPD) are the surface modification technology to improve mechanical properties, fatigue behavior and corrosion resistance of metals, and shot peening (SP) has been the most widely used SPD process. However, there are quite limited studies about the microsutructure evolution, residual stress, and high-temperature corrosion behavior of SP-treated martensitic SS. In this study, super 13Cr martensitic SS was treated by SP with various air pressures and nozzle speeds. The surface characteristics and high-temperature corrosion behaviour in 3.17 mol/L K2HPO4 solution were investigated through finite element model analysis, characterization of residual stress and microstructure, as well as electrochemical and stress corrosion cracking (SCC) tests at 160 °C and 10 MPa. The results showed that SP-treated super 13Cr could generate high-level compressive residual stress and SPD microstucture, including nano-sized equiaxed grains, gradient lamellar structure and fragmented carbides. Increasing air pressure contributed to achieve uniform nanocrystalline, but tended to generate high dislocation density and surface defects. The improving effect of SP treatment at low air pressure of 0.15 MPa on passivation ability was limited, and high air pressure adversely impacted corrosion resistance. SP-treated specimens showed high SCC susceptibility, due to the introduction of more surface defects, high angle grain boundaries, and dislocations.

Keywords

• Martensitic stainless steel
• Surface nanocrystallization
• TEM
• Stress corrosion cracking