Energy Efficient CLB Design Based on Adiabatic Logic for IoT Applications

Abstract

Many IoT applications require high computational performance and flexibility, and FPGA is a promising candidate. However, increased computation power results in higher energy dissipation, and energy efficiency is one of the key concerns for IoT applications. In this paper, we explore adiabatic logic for designing an energy efficient configurable logic block (CLB) and compare it to the CMOS counterpart. The simulation results show that the proposed adiabatic-logic-based look-up table (LUT) has significant energy savings for the frequency range of 1 MHz to 40 MHz, and the least energy savings is at 40 MHz, which is 92.94% energy reduction compared to its CMOS counterpart. Further, the three proposed adiabatic-logic-based memory cells are 14T, 16T, and 12T designs with at least 88.2%, 84.2%, and 87.2% energy savings. Also, we evaluated the performance of the proposed CLBs using an adiabatic-logic-based LUT (AL-LUT) interfacing with adiabatic-logic-based memory cells. The proposed design shows significant energy reduction compared to a CMOS LUT interface with SRAM cells for different frequencies; the energy savings are at least 91.6% for AL-LUT 14T, 89.7% for AL-LUT 16T, and 91.3% AL-LUT 12T.

Keywords

• configurable logic block
• energy efficiency
• FPGA
• adiabatic-logic-based LUT
• adiabatic-logic-based memory cell
• IoT