Journal of Petroleum Exploration and Production Technology (Mar 2024)

Interactions between chloride-based salts (CaCl2 and MgCl2), ionic liquids, pH, and titanium oxide nanoparticles under low and high salinity conditions, and synthetic resinous crude oil: dorud oilfield

  • Mehrdad Pazhoohan,
  • Ali Zeinolabedini Hezave

DOI
https://doi.org/10.1007/s13202-024-01759-x
Journal volume & issue
Vol. 14, no. 5
pp. 1311 – 1330

Abstract

Read online

Abstract Unfortunately, oil reservoirs are complex considering the fluids (e.g., crude oil composition) and rock properties making it hard to propose a simple enhanced oil recovery (EOR) method for higher oil production. Besides, most of the investigations had focused on crude oil which is a complex mixture of thousands of components making it hard to extract any reliable conclusions with respect to the crude oil type. So, the current study is focused on the application of ionic liquids from different families of pyridinium and imidazolium, titanium oxide nanoparticles, and salts (MgCl2 and CaCl2) in the presence of resinous synthetic oil for the first time. The obtained results using the central composite design (CCD) approach revealed the positive effect of resin fraction on the IFT reduction by 27% considering the initial value (34.9%). Using the CCD approach revealed that using pH = 7, MgCl2 concentration = 21,000 ppm, CaCl2 concentration = 21,000 ppm, resin fraction of 9wt%t and 500 ppm of [C12mim][Cl] concentration reduces the IFT to minimum value of 0.62 mN/m while the minimum IFT value for optimum conditions of solution includes [C12py][Cl] led to minimum IFT value of 2.2 mN/m. But, the contact angle measurements revealed better synergy between [C12py][Cl] and TiO2-NPs (0–200 ppm) for better wettability alteration toward water-wet condition (27.3°) than [C12mim][Cl] (33.2°). Moreover, the IFT measurements revealed that the presence of TiO2-NPs is effective in reducing the IFT of the optimum formulations to 0.55 and 0.84 mN/m for [C12mim][Cl], and [C12py][Cl], respectively. According to the results, it seems that the obtained optimum formulations for [C12mim][Cl], and [C12py][Cl] are applicable for EOR purposes as new hybrid solutions.

Keywords