Recovery of Plastics from WEEE through Green Sink–Float Treatment

Abstract

Increasing demand for electrical and electronic equipment results in the generation of a rapidly growing waste stream, known by the acronym WEEE (waste electrical and electronic equipment). The purpose of this study was to evaluate the effectiveness of green sink–float treatment in sorting plastic polymers typically found in WEEE (PP, ABS, PA6, PS, and PVC). Molasses, a by-product of sugar bio-refining, was added in various concentrations to water to form solutions at different densities. The methodology was initially tested on virgin polymers; later, it was applied to plastics from a WEEE treatment plant. The polymers were characterised through near infrared spectroscopy (NIRS) and Fourier-transform infrared spectroscopy (FTIRS) analyses; the detection of any additives and flame retardants was conducted using the sliding spark technology (SSS2) and scanning electron microscope (SEM—EDX). The results showed that, for plastics from WEEE, the recovery efficiency was 55.85% for PP in a solution of tap water while the remaining part of PP (44.15%) was recovered in a solution of water to which 90% molasses was added. Furthermore, 100% recovery efficiency was obtained for PS and 93.73% for ABS in a solution of tap water with the addition of 10% w/v molasses. A recovery efficiency of 100% was obtained for PVC and 100% for PA6 in a solution consisting solely of molasses.

Keywords

• WEEE
• sink–float
• recycling
• sustainability
• plastics