Adsorption of Ethylenediaminetetraacetic Acid on a Gel-Type Ion-Exchange Resin for Purification of Liquid Waste Containing Cs Ions

Abstract

Because of its excellent chelating property, ethylenediaminetetraacetic acid (EDTA) is used as a complex agent, not only for heavy metals, but also for radioactive isotopes during the decontamination of nuclear facilities. The removal of EDTA was investigated by adsorption with commercially available, gel-type, anion-exchange resins (AERs), which are based on cross-linked polystyrene with positive tertiary amine groups. Because of the positive charge on AERs, they could adsorb EDTA effectively even in a solution mixed with ions of cesium (Cs) via electrostatic attraction. Because EDTA adsorption by cation-exchange resins (CERs) was not possible, it was concluded that the negative charges on CERs do not contribute to the interaction with EDTA. The maximum adsorption capacity (qmax) of AER (2 g/L) for EDTA removal, calculated by the Langmuir isotherm model was 0.47 mmol/g for initial EDTA concentrations in the range of 0.01⁻1 mM in the EDTA/Cs mixed solution. The Langmuir isotherm model was found to be suitable for EDTA adsorption on AERs, indicative of monolayer adsorption. The results clearly suggested that the AERs could efficiently remove EDTA, regardless of the presence of nuclides, such as Cs ions in the aqueous solution.

Keywords

• ethylenediaminetetraacetic acid
• ion exchange resin
• Cs ions
• radioactive liquid waste
• adsorption