A Study on Evaluation of Manganese Removal Efficiency by Oxidant types Based on Experimental Data

Abstract

Objectives The purpose of this study was to investigate the treatment efficiency according to the oxidant types for dissolved manganese in the inflow of raw water into the water treatment plant in Korea. Methods Three types of oxidant were selected: chlorine, ozone, and potassium permanganate. Experimental factors influencing manganese removal efficiency were determined as dissolved manganese concentration in raw water, dose, water temperature, pH, and contact time. In addition, total experimental schemes were designed according to the design of experiments method. According to the designed analysis method, the mentioned factors were used as multi variables on which evaluate the manganese removal efficiency. Results and Discussion When using chlorine, the effect of pH was the greatest, followed by dose, water temperature, and contact time in order to have a significant effect on removal efficiency. In the case of using ozone, the pH effect was relatively large at low concentration of dissolved manganese, and the dose effect was found to be greater as the concentration was increased. Also, when potassium permanganate was used, the effect of pH, contact time and temperature was insignificant, while the effect of dose was the greatest for manganese removal. Conclusion The optimum dose of chlorine is about three times to secure a removal rate of about 40 to 80%. The optimum dose of ozone was 1.0 to 1.6 mg/L, and it was found that a removal rate of at least 40% or more could be secured. Also, the optimum dose of potassium permanganate is 1.7 to 2.5 times of the dissolved manganese concentration, and it is possible to secure a removal rate of at least 60%.

Keywords

• design of experiments
• statistical analysis
• oxidants
• manganese removal efficiency