Kinetic studies of dexamethasone degradation in aqueous solution via a photocatalytic UV/H2O2/MgO process

Abstract

Abstract Wastewaters discharged from different industries and hospitals may contain pharmaceuticals, especially dexamethasone (DEX). Thus, we applied the UV/H2O2 photocatalytic method in the presence of the MgO nanoparticles to remove dexamethasone from synthetic wastewater. Moreover, the effects of parameters such as pH (3–11), hydrogen peroxide concentration (1–8 mM), initial DEX concentration (5–30 mg/L), and catalyst dosage (0.01–0.2 g/L) during the reaction times (0–30 min) were investigated. Furthermore, the efficiency of UV/H2O2 in the presence and absence of catalysts was investigated. The photocatalyst is characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and Fourier-transform infrared spectroscopy (FTIR) techniques. It was found that the removal rate was enhanced by decreasing pH and the initial dexamethasone concentration. The removal rate was enhanced somewhat with concentrations of hydrogen peroxide and MgO. In the case of UV/H2O2/MgO, 87% removal efficiency was achieved, under the optimal conditions: pH 3, contact time of 30 min, dexamethasone concentration of 20 mg/L, H2O2 of 0.5 mM, and UV radiation of 55 watts. The kinetic data indicated that the reaction followed the second-order kinetic model. The results showed that the UV/H2O2 photochemical process can efficiently remove dexamethasone from aqueous in the presence of a MgO catalyst, and the mineralization efficiency was reached at about 98%.