Buildings (Nov 2021)

On the Use of Perforated Sound Absorption Systems for Variable Acoustics Room Design

  • Andreia Pereira,
  • Anna Gaspar,
  • Luís Godinho,
  • Paulo Amado Mendes,
  • Diogo Mateus,
  • Jesus Carbajo,
  • Jaime Ramis,
  • Pedro Poveda

DOI
https://doi.org/10.3390/buildings11110543
Journal volume & issue
Vol. 11, no. 11
p. 543

Abstract

Read online

An important challenge for acoustic engineers in room acoustics design is related to the acoustic performance of multi-purpose auditoriums, which are typically designed to suit several performance requirements. With this intent, the analysis of several scenarios is usually performed individually, and then an acceptable solution, that may be adapted to several situations, is selected. One way of providing a more appropriate acoustic performance for each function of the auditorium is using variable sound absorption techniques to control reverberation and other relevant acoustic phenomena associated to sound perception. In this paper, the acoustic behavior of a perforated system that may be suitable for achieving a variable acoustic solution for room acoustic design is addressed. In the design of a cost-effective solution, the surface appearance is kept unchanged, while variable acoustic behavior is achieved either by closing the holes in the back face of the perforated panel or by placing a porous material in varying positions inside the backing cavity, thus accomplishing different acoustic requirements within a multipurpose auditorium. An analytical approach, based on the transfer matrix method is employed for preliminary acoustic sound absorption assessment provided by the system and to develop optimized solutions. Diffuse sound absorption is then computed and used to simulate, by the ray-tracing method, the acoustic behavior of a multipurpose auditorium to demonstrate efficient acoustic performance for different types of use.

Keywords