Frontiers in Dental Medicine (Jun 2024)
Application of non-destructive testing methods for assessing fracture resistance in dental ceramics: the sound harvesting test
Abstract
IntroductionEvaluating the fracture resistance of dental ceramics such as monolithic zirconia crowns is crucial for assessing their durability. Conventional destructive laboratory tests often fail to accurately evaluate the timing and failing crack formation of these brittle materials. Non-destructive testing methods, such as acoustic emission testing (AET), offers an alternative by providing valuable data on material properties without causing damage to the samples.The in vitro study aimed to evaluate the sensitivity of a sound harvesting modified acoustic emission testing by comparing the fracture resistance of posterior monolithic zirconia crowns (MZCs) measured via the modified set up with that of a conventional fracture toughness test.Material and methodsA modified acoustic emission set up, the sound harvesting test (SHT), featuring a condenser microphone, an amplifier, a custom audio chipset and a cut-off switch integrated into a universal testing machine, was compared to a conventional fracture toughness test to measure fracture loads on 50 posterior monolithic zirconia crowns divided in two groups.ResultsThe sound harvesting test recorded a mean fracture load of 1,108.99 N, significantly less than the 1,292.52 N measured with the conventional test, indicating a more sensitive detection of fractures. Statistically significant differences (p < 0.05) were observed between the two groups.ConclusionDespite its limitations, the study suggests considering sound harvesting testing as an potential alternative for fracture load testing of dental brittle materials due to its ability to identify failures at lower loads enhancing therefore a more accurate evaluation of the behavior of dental materials. However, further testing on a broader range of dental materials is warranted to improve result accuracy and applicability.
Keywords