Bilayer coating fabricated on aluminum alloy substrates with superamphiphobicity, corrosion resistance, self-cleaning, and delayed icing properties

Abstract

To address the functional failure caused by low-surface-tension liquid wetting and adhesion in superhydrophobic materials, in this study, we constructed a bilayer coating with superamphiphobic properties using an epoxy (Ep) bonding layer and an organosilane-grafted attapulgite (OG-ATP) layer through spray-coating technique. The prepared superamphiphobic bilayer coating exhibited high contact angles (CAs) and low sliding angles (SAs) for cold water (25 °C), hot water (85 °C), glycerol, ethylene glycol, peanut oil, and even n-hexadecane (CA = 150.4 ± 0.3° and SA = 7 ± 2°) with surface tension of 27.5 mN m−1. Surface morphology and elemental analysis confirmed the coating's unique micro-nano hierarchical structure and low surface energy characteristics. Electrochemical impedance spectroscopy (EIS) results showed that the surface charge transfer resistance (Rct) and low-frequency modulus (|Z|0.01Hz) were enhanced by 6–7 orders of magnitude compared to the bare aluminum alloy substrate. The anti-corrosion performance remained stable even after 5 days of 3.5 wt% NaCl immersion. Additionally, icing experiments with water droplets at −10 °C and −15 °C revealed a significant delay in ice formation on the substrate protected by the bilayer coating. The development of this protective material, combining superamphiphobicity, self-cleaning, corrosion resistance, and anti-icing functions, will provide advanced technological reserves in areas such as marine, aviation, transportation, and manufacturing.

Keywords

• Superhydrophobic
• Superamphiphobic
• Corrosion
• Attapulgite
• Coating