Temperature Effect on Short—Term Strength of Lithium Hydride with Tensile and Three—Point Bend Specimens

Abstract

Strength is one important mechanical property of lithium hydride (LiH) for application as a neutron moderator and absorbent at elevated temperatures. Using the digital image correlation (DIC) method for deformation measurement, the short—term strength of LiH was investigated with both tensile and three—point bend (3PB) specimens in the range of room temperature (RT) to 600 °C. The results show that the temperature dependence of the strength from tensile and 3PB tests shows similarity. As the temperature increases, the strength changes slightly, then rises to the maximum and finally decreases due to the softening effect. The fracture surfaces of specimens show the main characteristics of trans—granular fracture at different temperatures, except for 600 °C. With increasing temperature, the fracture surfaces become rough and numerous tortuous micro—cracks are found. Especially for 3PB specimens, there are dimple—like structures with distorted grains and obvious intergranular cleavage fracture.

Keywords

• lithium hydride
• digital image correlation
• strength
• temperature effect