Experimental‐based study of gear vibration characteristics incorporating the fractal topography of tooth surface

Abstract

Abstract Microscopic roughness is inevitable on the gear meshing surface, which is also a key parameter affecting the dynamic response. The surface roughness exhibits self‐affine characteristics across multiscales. To explore the influence of surface fractal topography on the vibration amplitude of the gear system under different rotational speeds and loads, an experimental setup of spur gear transmission is devised. The fractal dimension and fractal roughness of the meshing surface are calculated by the power spectral density method. The relationships between gear response and fractal parameters are revealed experimentally. Results indicate that a rougher tooth surface, that is, a smaller fractal dimension or larger fractal roughness, corresponds to an intense vibration amplitude. The sensitivity of dynamic response to the tooth surface topography varies at different rotational speeds and loads. Under low speed and light load conditions, the fractal dimension and fractal roughness have a more obvious influence on the dynamic response of the gear transmission system. With the increase of speed and load, the macroworking conditions gradually become the main factor attributed to vibration amplitude.

Keywords

• spur gear
• fractal roughness
• vibration amplitude
• surface morphology