Synergetic analysis between polyvinyl chloride (PVC) and coal in chemical looping combustion (CLC)

Abstract

This effort is to investigate three different Cu-based oxygen carriers (OCs) with polyvinyl chloride (PVC) and coal in chemical-looping combustion (CLC). The combustion process and synergetic analysis of PVC with coal were evaluated. There were four stages in the reaction of OCs with PVC, which HCl released from PVC could react with OCs at about 200–400 °C. CuO and CuO modified by limestone showed better immobilization of chlorine while CuO modified by iron ore and chrysolite inhibited the reaction of HCl with CuO. PVC char combustion temperature started at about 500 °C which were lower than that of coal char. The combustion efficiency of PVC CLC was all above 92%, except using Cu-Fe as OC which was about 88%. The presence of ZD in PVC showed positive effect on every stage. The addition of coal inhibited the reaction of HCl with CuO. The presence of PVC in ZD reduced the temperature of coal char and the addition of ZD in PVC increased the reaction rate. The synergistic effect was obvious between the PVC and coal blends which is beneficial for the complete combustion in solid fuel CLC

Keywords

• Chemical looping combustion
• Polyvinyl chloride (PVC)
• Cu-based oxygen carriers
• Natural ore
• CO2 capture